Power Stop K6139 Audi A6 Rear Brake Pads & Drilled Slotted Rotors Kit — 2012–2018 A6 A7 Quattro

Description

If your Audi A6 rear brake pads are worn, vibrating, or squealing — this is the kit that fixes it properly. The Power Stop K6139 Audi rear brake upgrade delivers everything your C7 A6 or A7 Quattro needs in one complete box: Z23 Carbon-Fiber ceramic pads, drilled and slotted rear rotors, and an OEM-compatible wear sensor wire. Designed specifically for 2012–2018 Audi A6 and A7 Quattro models on the C7 platform, this kit bolts straight in with zero modifications. No running around sourcing separate parts — one kit, one install, done right.

Key Features of the Power Stop K6139 Audi A6 Rear Brake Pads Kit

• Z23 Carbon-Fiber Ceramic pad formula — outperforms OEM Audi A6 rear brake pads in stopping distance and produces significantly less brake dust on your wheels
• Drilled & slotted rear rotors — maximum heat venting under hard braking, Silver Zinc Dichromate coating eliminates surface rust from day one
• OEM-compatible brake wear sensor wire included — your A6 dash brake warning works correctly the moment installation is complete, no separate purchase needed
• Direct bolt-on fitment for the C7 platform — no modifications, no adapters, engineered specifically for 2012–2018 Audi A6 Quattro and A7 Quattro
• Powder-coated backing plate on pads — resists corrosion across the full service life of the brake pad
• Complete kit contents — 2× rear drilled slotted rotors + 1× rear Z23 pad set with hardware + 1× brake wear sensor wire, everything in the box
• 36-month / 36,000-mile Power Stop warranty — covered on every component

Audi A6 Quattro Drilled Slotted Rotors — Why They Beat OEM

The factory rotors on the Audi A6 C7 are solid-cast and notorious for surface rust when the car sits overnight. The Audi A6 Quattro drilled slotted rotors in this kit solve both the performance and the rust problem in one go. Drilled holes vent heat and prevent brake fade during repeated hard stops — essential on a heavy executive platform that weighs over 3,800 lbs. The slots clear gas, dust, and debris from the pad surface continuously, keeping the Audi A6 Quattro drilled slotted rotors biting cleanly through every braking event. Silver Zinc Dichromate plating means these rotors look sharp on your A6 or A7 from day one — and hold up through winters, rain, and daily commuting without the orange rust ring you get with OEM.

Vehicle Compatibility — Audi A6 and A7 Brake Pads Rotors

This kit covers the full C7 generation. The Audi A7 brake pads rotors share the exact same rear brake specification as the A6 on this platform, making the Power Stop K6139 one of the most versatile rear brake kits available for both models:

• 2012–2018 Audi A6 Sedan (C7 / 4G2) — 2.0T TFSI, 3.0T TFSI, 3.0 TDI
• 2012–2018 Audi A6 Quattro Sedan (C7 / 4G2) — 2.0T TFSI, 3.0T TFSI, 3.0 TDI
• 2013–2018 Audi A7 Quattro Sportback (C7 / 4G8) — 3.0T TFSI, 3.0 TDI
• 2012–2018 Audi A6 Allroad Quattro (C7 / 4GH) — where applicable

Does NOT fit: Audi A6 C6 (2005–2011), Audi A6 C8 (2019+), Audi A4, Audi A8, Audi S6, Audi RS6

The Audi A7 brake pads rotors in this kit are a direct fitment match — no adapters, no guesswork for either model on the C7 chassis. Always verify your exact model year against the list before ordering.

Installation & Fitment Notes for Your Audi A6 Rear Brake Pads

Rear brake replacement on the Audi A6 C7 takes approximately 45–60 minutes per side using standard hand tools and a caliper wind-back tool. After fitting the Audi A6 Quattro drilled slotted rotors, complete the Power Stop bedding-in procedure included in the kit — 30–40 minutes of progressive stops on a clear road — this maximises rotor and pad performance from the first hard stop. The brake wear sensor wire plugs directly into the OEM harness with no wiring changes needed. Always confirm your exact model year and trim against the compatibility list above before ordering.

Why Buy Audi A6 Brake Kit From All Audi Spare Parts

When you buy Audi A6 brake kit from a generic parts warehouse, you get a part number and nothing else. At All Audi Spare Parts, we stock parts exclusively for Audi vehicles — no generic catalog, no guesswork fitment. The Power Stop K6139 Audi kit is verified for the C7 A6 and A7 Quattro rear brake specification, and we keep it in stock specifically for Audi owners who want a real upgrade over OEM without going full RS-spec. When you buy Audi A6 brake kit from us, you get fast USA shipping, secure checkout, and a no-hassle return process if anything isn’t right. You’re dealing with Audi specialists — not a warehouse that happens to stock your part number.

Frequently Asked Questions

Q: Are these the right Audi A6 rear brake pads for my 2015 A6 Quattro? A: Yes. These Audi A6 rear brake pads fit the full 2012–2018 Audi A6 Quattro (C7 chassis), including the 2015 model year. Both 2.0T and 3.0T engine variants are covered. Check the compatibility list above for your exact configuration.

Q: Do the Audi A7 brake pads rotors in this kit fit the full 2013–2018 range? A: Yes. The Audi A7 brake pads rotors in the Power Stop K6139 fit the complete 2013–2018 Audi A7 Quattro Sportback (C7 / 4G8) in both 3.0T TFSI and 3.0 TDI variants.

Q: Where is the best place to buy Audi A6 brake kit and get fast delivery? A: You can buy Audi A6 brake kit directly from All Audi Spare Parts with fast USA shipping on all in-stock orders. In-stock kits ship within 1 business day from our US warehouse.

Q: Do the Audi A6 Quattro drilled slotted rotors need bedding in? A: Yes. After fitting the Audi A6 Quattro drilled slotted rotors, follow the Power Stop bedding procedure included in the kit. This takes 30–40 minutes and significantly extends rotor life while maximising stopping performance from day one.

Q: What makes the Power Stop K6139 Audi kit better than OEM brake parts? A: The Power Stop K6139 Audi kit upgrades every weak point of the factory rear brake system. The Z23 Carbon-Fiber ceramic pads produce less dust and stop shorter than OEM. The drilled slotted rotors run cooler and resist rust better than the factory solid rotors. And as a complete kit, everything is engineered to work together — pads, rotors, and sensor wire — rather than mixing unmatched brands.